Emergency Eyewash And Shower
Emergency Eyewash-G1825
Application: Free standing, pedestal mounted eyewash with stainless steel bowl. Two GS-Plus™ spray-type outlet heads deliver a flood of water for rinsing eyes.
Spray Head Assembly: Two GS-Plus™ spray heads. Each head has a “flip top” dust cover, internal flow control and filter to remove impurities from the water flow.
Valve: 1/2″ IPS chrome plated brass stay-open ball valve. Valve is US-made with chrome plated brass ball and PTFE seals.
Bowl: 11-1/8” diameter stainless steel.
Pipe and Fittings: Schedule 40 galvanized steel. Furnished with orange polyethylene pipe covers for high visibility and corrosion resistance.
Supply: 1/2″ NPT female inlet.
Waste: 1-1/4″ NPT female outlet.
Sign: ANSI-compliant identification sign.
Quality Assurance: Valve, bowl and spray head assembly is factory assembled and water tested prior to shipment.
Emergency eyewash and shower-G1950
Safety station combines eye/face wash and shower from a single water outlet with stay-open ball valves. The 10″ safety orange ABS plastic shower head delivers 30 GPM at 30 PSI with a 20″ spray pattern diameter at 60″ above the floor.
Application: Combination eye/face wash and shower safety station with two large FS-Plus spray heads for thorough eye and face rinsing.
Shower head: 10″ diameter orange ABS plastic.
Valve: 1″ IPS chrome-plated brass stay-open ball valve with US-made chrome-plated brass ball and Teflon seals. Includes stainless steel actuating arm and 29″ stainless steel pull rod.
Spray head assembly: Two FS-Plus spray heads with “flip top” dust covers, internal flow control, and filters to remove impurities from water.
Eye/Face wash bowl: 11 1/2″ stainless steel.
Eye/Face wash valve: 1/2″ IPS chrome-plated brass stay-open ball valve with US-made chrome-plated brass ball and Teflon seals.
Pipe and fitting: Schedule 40 galvanized steel with orange polyethylene covers for high visibility and corrosion resistance.
Supply: 1 1/4″ NPT female top or side inlet.
Waste: 1 1/4″ NPT female outlet, positionable at 8″ or 20″ above the finished floor by reversing lower pipe nipples.
Sign: Furnished with ANSI-compliant identification sign.
Quality Assurance: Valve and spray head assemblies are factory assembled and water tested prior to shipment.